9. Parking and Shutdown
After landing, some procedures still have to be processed before the aircraft can be handed over to the ground crew. Many virtual pilots skip the shutdown, but a successful flight requires shutting down.
Engine Shutdown
When you arrive at the parking position, you use the ENGINE SHUTDOWN checklist to shut down the engines.
- Turn off the Taxiing lights, TAXI LIGHTS OFF LVP.
- You can do this shortly before turning into the parking stand so as to not dazzle the ground crew.
- Set the Parking Brake on, PARKING BRAKE SET LVP.
- Set the engine to 60% RPM, then pull the throttle over IDLE to STOP position by, RShift + End or THROTTLE STOP HOTAS.
- Turn off the Beacon BEACON OFF
- Turn off the Engine Master, ENGINE MASTER OFF
- Turn off the JPT Limiter, JPT MASTER OFF
After The engine has stopped, continue by shutting down the electrics.
- Generator 1&2 off, GEN1/GEN2 OFF
- Battery Switch off, BATT OFF.
- Finally, open the Canopy, CANOPY OPEN.
The ground crew can now take over the plane and your mission is complete.
Up Next
The following section gives the details of flying the airfield circuit.